Kipp & Zonen

SUV5 Total UV Radiometer

  • For monitoring of Total UV irradiance
  • Linearized for high intensity UV lamps
  • Internal temperature correction
  • No change of desiccant for 10 years
  • RS-485 Modbus® RTU digital output
  • 4 to 20 mA or 0 to 1 V analog output

SUV5 Total UV Radiometer

SUV5 is a Smart version of the CUV5 with digital signal processing. The accurate polynomial temperature correction and linearization make it ideal for monitoring high intensity UV lamps used in environmental test chambers.

Specific parts of the UV spectrum such as UVA, UVB or UVE / UV Index cannot be derived from the SUV5 measurements. For measurement of these individual parameters our specific SUV models are required.

SUV5 has a RS-485 interface with Modbus® RTU communication protocol and an amplified analog signal output. It can operate from 5 to 30 VDC and takes little power. The calibrated sensitivity is stored in the SUV memory so that the digital data is directly in W/m2 and the analog output range is standardized.  SUV’s can be interchanged and no changes have to be made in the data logger or data acquisition system after recalibration.

Use our free SmartExplorer Windows™ software for display of data , data logging, to a PC and for changing Modbus® address and communication settings.

SUV5 is compatible with the same accessories as our SMP range of pyranometers.

Specifications

Spectral range (overall) 280 to 400 nm
Temperature response (-20 to +50°C) < 2 %
Response time (95%) 1 s
Non-linearity (0 to 400 W/m² with respect to 100 W/m²) < 1.5 %
Maximum UVA/UVB irradiance 400 W/m²
Operational temperature range -40 to +70 °C
Directional response (up to 70° with 100 W/m² beam) < 5 %
Field of view 180 °
Analogue output (-A / -V version) 4 to 20 mA / 0 to 1 V
Digital output 2-wire RS-485 Modbus® RTU

Downloads

Reviews

There are no reviews yet.

Be the first to review “SUV5 Total UV Radiometer”

Your email address will not be published. Required fields are marked *

Contact Us Directly

  • Contact Details