SST-7000 Series
- Accepts 2 or 3-wire speed sensors
- 0-50 KHz input frequency range
- 4-20 rnA output (isolated)
- 0-5 or 0-10 VDC linear output
- 50 msec (std) or 10 msec (opt) response time
- 0, 1, 2 or 4 SPDT relays
- Failed (open) pickup sensing
- Square wave repeater output
- 10-36 VDC input supply power
- Available input isolation transformer
- PC programmable over USB port
- Front Keypad programmable (for models with LCD Display)
Dynalco® Digital Speed Switch & Transmitter
Reliable, accurate over/under speed protection, transmitter with models upto 4 standard relay set-points and LED or keypad configuration display options.
The SST7000 use a pulse or frequency input to provide an accurate 4-20 mA output or 0-5/0-10 VDC linear output ready for direct interface with machine condition monitoring devices or systems. The available input isolation option helps resolve ground loop and signal conversion challenges. The devices accept sinusoidal and square wave inputs from variable reluctance and digital speed sensors.
The SST7000 can be easily programmed in a matter of a few minutes with a PC using a USB connection. Phoenix connectors on the units allow for quick dis-connect and overall ease of wiring.
Specifications
General Specifications*
| Input Supply Voltage: DC rating (standard) AC rating: LCD Display only (-AC Suffix) |
10-36 VDC, maximum 10 Watts (standard)AC (and DC) supply voltage on terminals VAC L & VAC N. 115 to 275 VAC & 115 to 400 VDC, with maximum 10 Watts |
||
| lnput Types:
Isolated RPM: Input Sensitivlty: |
2-wire magnetic pickup (variable reluctance) 3-wire Hall-Effect 3-wire amplified VR typeIsolated RPM input from the power supply ground by more than 300V peak From 25 mVRMS to 50 VRMS max |
||
| Output Accuracy: Proportional Output:Relays: |
0.1% of full-scale typical for all the outputs
4-20 mA (24V sourced – fully isolated) SPDT contacts rated 6 Amps at 28 VDC or 115 VAC |
||
| Output Power: | +12 VDC (40mA) output (e.g. for active magnetic pickups) |
||
| Electrical Connection: | Terminal block | ||
| Display lnformatlon:
Display screen: Display update rate: |
RPM, Alarms, Settings (RPM signal, setpoints / relay logic, analog input, security, relay test, setpoint log, and display)5-digit LCD, 2” x 1.22” screen dimension Approx. 7 msec to update LCD display |
||
| Environmental: | Operating temperature range: -40°C to +70°C Storage temperature range: -40°C to +80°C |
||
| Mechanical: | DIN rail mount (standard 35 mm) | ||
| Enclosure rating: | NEMA 1 | ||
| Approvals: | CSA Certified, Class 1 Division 2, Groups A, B, C & D | ||
Contact Us Directly
Reviews
There are no reviews yet.