Water Cut Meter

Water Cut Meter
- Easy calibration
- Temperature range: Up to 232°C (450°F)
- Process pressure: Up to 103 bar (1,500 psi), probe dependent
- Power supply: 13-30VDC
For more than 50 years, Drexelbrook has been the world leader in capacitive based water cut measurement. We offer the highest pressure and temperature ratings in the industry and our capacitive probes can handle pressures up to 1500 Psi and temperatures up to 450°F.
Our popular Universal IV CM Series is a high quality water cut meter, also known as a water cut monitor or BS&W, with a range of 0-50% in light oil and 0-80% in heavy oil.
It is built upon the Drexelbrook expertise in RF Admittance that allows the electronics to ignore paraffin and other coatings that buildup on the probe.
The Universal IV CM features a unique Cote Shield that is designed into the Universal IV CM series and enables the instrument to ignore a pre-determined length of the sensing element.
This water cut meter comes with a Perm-A-Seal sensing element that does not require epoxy coatings that wear out and require expensive servicing.
Using this water cut meter together with our HRTWin or new Stexplorer PC software field configuration is possible from anywhere along the two wire loop.
The Universal IV CM sensing element is selected based on pipe size, wetted parts, NACE requirement and pressure/temperature. Drexelbrook offers a wide range of probes to fit virtually any application required.
All water cut meters features a built-in LCD display and keypad and comes from the factory pre-calibrated and requires only one point validation.
The Universal IV CM water cut meter is intrinsically safe and approved for Class I, Div1, and Zone 0 hazardous locations.
Bid Specs
Certificates
- Universal IV Approval Certificate ATEX
- Universal IV Approval Certificate CE Mark
- Universal IV Approval Certificate FM
- Universal IV Approval Certificate FMc
- Universal IV Approval Certificate IECEx
Data Sheets
- Universal IV CM Water Cut Meter Data Sheet
- Universal IV CM Water Cut Meter with Density Compensation Data Sheet
- Universal IV CM Water Cut Meter with Temperature Compensation Data Sheet
- Universal IV CM Water Cut Meter with Spool Piece Sensing Data Sheet
Drawings
- Universal IV Drawing – Universal IV Signal Filter Assembly, RFI and Surge Protection
- Universal IV Drawing – Universal IV Probe Filter Assembly, RFI and Spark Protection
- Universal IV Drawing – Heavy Duty Spark Protection
- Universal IV Drawing – Electrostatic Filter Assembly
- Universal IV Approval Control Drawing ATEX / IECex
- Universal IV Approval Control Drawing FM / FMc
Manuals
- Universal IV CM Water Cut Meter Manual
- Universal IV CM Water Cut Meter with Density Compensation Manual
- Universal IV CM Water Cut Meter Quick Start Guide
- Universal IV CM Water Cut Meter STExplorer PC Software Utility Manual
- Universal IV CM Water Cut Meter with Temperature Compensation Manual
Worksheets